Repair / Wiring, fuses and switches
Wiring, fuses and switches
Problems, repairs and parts for the wiring, fuses and switches.
Problems
- Problems after fitting accessories or an alarmRide with care
- Burning smell from the wiringStop now
- Fuse keeps blowingDo not ride
- Ignition switch is stiff or cuts powerDo not ride
- Electrical faults come and goRide with care
- Nothing happens when the key is turned onDo not ride
- Handlebar switch does not work properlyRide with care
- Electrical faults after rain or washingRide with care
Repairs
- Check fuses and relaysRider job · 10 to 30 min
- Find a short circuitHome workshop · 30 to 120 min
- Wire an accessory safelyHome workshop · 60 to 120 min
- Find a wiring faultHome workshop · 30 to 90 min
- Test the regulator rectifierHome workshop · 30 to 45 min
- Clean and seal electrical connectorsHome workshop · 15 to 45 min
- Test and charge a 12 V batteryHome workshop · 15 min to test; charging takes many hours
- Clean and tighten battery terminalsRider job · 15 to 30 min
- Test the ignition switchHome workshop · 20 to 40 min
- Clean and tighten earth connectionsHome workshop · 20 to 45 min
- Do a voltage drop testHome workshop · 20 to 40 min
- Clean a handlebar switchHome workshop · 30 to 60 min
- Test the engine stop switchHome workshop · 20 to 30 min
- Test a lighting circuitHome workshop · 20 to 45 min
- Remove, check, gap and fit a spark plugRider job · 15 to 20 min
- Find what is draining the batteryHome workshop · 30 to 60 min
- Fit LED indicators correctlyHome workshop · 45 to 90 min
- Test the charging systemHome workshop · 20 to 30 min
