Repair / Repairs / Tighten drain and filter bolts without stripping them

Repair

Tighten drain and filter bolts without stripping them

Home workshopBasic tools and some experienceTime: 10 min (estimate)

Drain plug with a weak Allen socket head
Drain plug with a weak Allen socket head
Strong drain plug with a flanged head
Strong drain plug with a flanged head

Drain and filter bolts screw into soft aluminium. Many are over-tightened, so they become very hard to undo, and a stripped thread is a bad repair. On many bikes there is not enough metal around the hole for a thread repair kit.

Safety

  • Hot oil burns. Let the engine cool a little.
  • Use a socket that fits well. A rounded bolt head is hard to undo.

Before you remove it

  • Check that you have the correct bolt. On some engines with a side drain bolt there is a gearshift spring bolt nearby. Do not remove the gearshift spring bolt. Putting it back means taking the engine out of the frame. The manual shows which is which.
  • Some engines have two drain bolts. Drain both if the manual says so.
  • Look at the plug. Some carry a magnet for steel particles. Some plugs have an Allen socket head with a flange. Depending on the design these can be strong or weak, so use a good-fitting key and do not over-tighten.

Steps to refit

  1. Clean the plug and the hole. Fit a new washer or O-ring.
  2. Look up the tightening torque in the manual. Use a torque wrench.
  3. If the manual has no torque for the filter bolt, measure the bolt size and use a standard torque chart for that size.
  4. Tighten to the value. Do not add extra.
  5. A bolt that is stuck from over-tightening may need a reinforced socket. A stripped hole needs a larger bolt, an expanding plug or an insert, and may need a workshop.

Check your work

  • No oil seeps after the engine has run.
  • The bolt did not turn past the torque value.

If it did not fix the problem

Watch it done

How-toHow to Change Motorcycle Oil at RevZilla.comRevZilla · 16:38 · YouTube

Change oil and filter, new washer, torque the drain bolt; use your manual's grade and quantity.

Videos by their creators on YouTube, chosen because they show this clearly. Values in a video are for the bike shown; use your own bike's manual.

Problems this repair helps with

Sources

Values marked K-Light 125 are for that reference bike. Use your own bike's manual for its values. Text CC BY-SA 4.0, Transitions Lab.